classroom art supply article header

Lexmark Printer Connected But Not Printing? The 7-Step Checklist I Use

Your Lexmark printer says "Ready." The network light is green. Your computer sees it. You hit print. Nothing happens. The job disappears from the queue, and the printer sits there—silent, smug, useless.

I've been the person fielding these calls for four years. I manage 12 printers across three office floors for a 150-person company. When a Lexmark printer connects but won't print, the problem is usually something simple that five minutes of checking can solve. No IT ticket needed.

This is the checklist I use. Seven steps. Most issues resolve by step four.

Quick context: I'm an office administrator, not a network engineer. Drivers, firmware conflicts, print server architecture—that's above my pay grade. What I can do is rule out the administrative-level stuff before escalating, which saves everyone time. And believe me, the helpdesk appreciates it.

When This Checklist Applies

Use this when:

  • The printer appears on the network and your computer shows it as online
  • Print jobs vanish into the queue without printing
  • The printer display shows no obvious error
  • Other people in the office report the same issue

Don't use this for: paper jams, toner errors, physical damage, or the classic "grinding noise from inside the machine." Those are hardware issues. Call service.

Step 1: Look at the Printer's Own Screen

Not your computer. Not the print dialog box. Walk over to the machine and look at what the printer itself is displaying.

This sounds obvious. It isn't. Nine times out of ten, somebody reports "the printer won't print" but the printer screen is actually showing something like "Load Tray 2" or "Toner Low: Replace Cartridge Soon" or—my favorite—"Sleep Mode: Press Any Key."

The print job might be failing because the printer is waiting for a specific paper size in a specific tray, and the user never noticed the prompt. The computer says "ready" because the connection is fine. The printer says "I need letter-size paper in tray 1" because someone loaded legal-size into it last week.

Checkpoint: Before you touch any software, confirm the printer display says nothing more urgent than "Ready." If it's asking for paper, toner, or a keypress, deal with that first.

Step 2: Clear the Print Queue

A stuck job blocks everything behind it. If one document crashed halfway through, the next eleven jobs will sit there waiting for the first one to resolve. It never does.

On Windows: Settings → Bluetooth devices → Printers and scanners → [your Lexmark model] → Open print queue → Cancel all documents.

On Mac: System Settings → Printers & Scanners → [your Lexmark model] → Print Queue → click the "X" next to each job.

After clearing, restart the print spooler service (Windows) or stop and restart the printer queue (Mac). On Windows: open Services, find "Print Spooler," right-click → Restart. This is the step that actually fixes the invisible job that's technically still "printing" in the background.

Checkpoint: Queue is empty. Spooler service is running. Now try a one-page test print.

Step 3: Confirm You're Sending the Job to the Right Printer

This one sounds dumb. It isn't. Big offices have three "Lexmark MS810" or "Lexmark MX622" in the device list, named by whoever installed them ten years ago. "Lexmark MS810 (Copy 2)" is not the same device as "Lexmark MS810dn."

Open your print dialog. Look at the selected printer name. Then look at the printer in front of you. Match the name. If there's any doubt, print a configuration page from the printer's physical panel—most Lexmark models let you do this from Menu → Reports → Print Config Page. That page will tell you the exact name, IP address, and model number. Match it to what your computer shows.

Three things to match: printer name, IP address, model number. In that order.

I once spent 40 minutes troubleshooting a "dead" printer that was receiving jobs all along—the user was just sending them to a decommissioned unit on another floor.

Step 4: Check the IP Address

Network printers have a nasty habit of losing their reserved IP address after a router reboot or DHCP lease renewal. The computer still has the old address cached. The printer has a new one. They no longer talk.

From the printer's control panel, print the network configuration page (usually Menu → Reports → Network Settings). Look for the current IP address. Then check what your computer is pointing to:

Windows: Printers & scanners → Lexmark → Printer properties → Ports tab. The checked port should match the printer's current IP.

Mac: System Settings → Printers & Scanners → select the Lexmark → Options → check the address field.

If they don't match, update the port and try again. Better yet, ask your IT contact to reserve a static IP for the printer so this doesn't happen next month.

I'm not 100% sure why routers drop the reservation, but it happens. Take this with a grain of salt—your IT team will know the actual cause.

Step 5: Verify Paper and Media Settings

This is the step most people skip. Lexmark printers—especially enterprise models like the Lexmark MS810dn printer—are picky about media settings. The print job says "Letter, plain paper." The tray is loaded with "Letter, heavy cardstock." The printer stops and waits for the right media. The computer shows "connected." Nothing prints.

Check the tray settings from the print dialog: paper size, paper type, paper source. Then check the physical tray: is the paper actually what the printer thinks it is? Most Lexmark trays have a dial or lever that needs to match the loaded paper. If it says "Plain" but you've loaded "Heavy," the printer will complain.

Fix the mismatch. Reprint.

Step 6: Print a Test Page from the Printer Itself

This is the diagnostic that tells you where the problem actually lives. Most Lexmark printers can print a built-in test page from the physical control panel: Menu → Reports → Print Test Page (or similar).

If the test page prints: the printer hardware is fine. The problem is in the network path, the driver, or the computer. Go to Step 7.

If the test page doesn't print: the problem is inside the printer. That's a service call, not a software fix.

Checkpoint: Test page in hand? Then you've isolated the issue to the computer/network side. No test page? Stop troubleshooting software. Call service.

Step 7: Update the Driver (Last Resort)

Most "connected but not printing" issues don't need a driver update. But if steps 1-6 failed—queue clear, port correct, media fine, test page works—the driver may have corrupted or gone out of sync after a system update.

Download the latest Lexmark Universal Print Driver from Lexmark's support site for your specific model. Uninstall the old one. Install the new one. Re-add the printer. Test again.

This is the most time-consuming step. Save it for last.

What This Checklist Doesn't Cover

I'm an office administrator. I can tell you how to check a print queue and match an IP address. I can't tell you why the print spooler crashed on a specific security update or how to configure a print server cluster. If you're dealing with enterprise print management software, VLANs, or driver conflicts across 500 machines—talk to your IT team. This checklist is for the daily grind, not the infrastructure rebuild.

Also: I can only speak to the Lexmark models we run—mostly MS810dn and MX622 series. If you're working with a different line, the menu names might differ slightly. The process is the same.

What I Learned the Hard Way

I used to call IT at step 2. If the queue didn't clear, I'd open a ticket and wait. Then came the March 2023 client visit. Our conference room printer stopped working 20 minutes before a board meeting. The IT ticket was "high priority." It still took 90 minutes for someone to show up.

The problem? Tray 2 was set to legal paper. Someone had loaded letter. The printer was waiting. That's it. I could have fixed it in two minutes by walking over and reading the display.

Now I keep this checklist taped inside the supply cabinet. I get through steps 1-7 in about five minutes for most issues. I've cut our printer-related IT tickets from roughly 15 per month to 2 or 3.

That $800 mistake from ignoring the checklist once—calling an emergency repair when the printer was just in sleep mode—taught me to verify the obvious first.

One Last Thing: Watch for Service Contract Gotchas

If you do need to call service, ask what's included before you authorize the visit. Some maintenance contracts charge a base rate and then add "diagnostic fees," "after-hours surcharges," and "parts procurement" on top. The quote looks reasonable until the invoice arrives.

I've learned to ask: "What's NOT included in this price?" before "What's the price?" It's saved us from a few unpleasant surprises. The vendor who lists every fee upfront—even if the total looks higher—usually costs less in the end. That's been my experience, anyway. Your contracts might differ.

Before you sign anything, use a simple total-cost calculator—or just a spreadsheet—to compare the real numbers. The base rate is rarely the final number.

The checklist above is what I use. It's not perfect. It won't fix every printer problem. But it'll get you through the 80% of issues that are simpler than they appear.

And it'll save you from being the person who called IT because the printer was in sleep mode.

Anjali Rao

Anjali Rao is a school and classroom supplies analyst covering geometry sets, rulers, compasses, protractors, glue sticks, pencil cases, classroom packs, student planners, lunch boxes, and hands-on learning materials. She applies ASTM F963, EN 71-1, and EN 71-3 while examining sharp points and edges, small parts, element migration, adhesive strength, dimensional accuracy, hinge durability, closure retention, cleanability, age grading, and classroom pack consistency. Her guides help educators, school districts, distributors, and buyers select materials for curriculum use, student handling, shared storage, replenishment, transport, and age-appropriate safety.

PreviousWhy I Stopped Buying the Cheapest Office Supplies (and What I Use Instead) Next三种企业物资紧急情况——以及应急响应协调员如何处理每一种